Boring and Honing

This machine is mainly used for maintaining the cylinder of motorcycle, etc. Place the cylinder to be bored under the base plate or on the plane of the base of the machine after the center of the cylinder hole is determined, and the cylinder is fixed,maintenance of boring and honing can be carried out. The Cylinders of the motorcycles with diameter 39-72mm and depth within 160mm can all be bored and honed. If the suitable fixture are fitted, other cylinder bodies with corresponding requirements can also be bored and honed.

Diameter of boring &honing hole 39-72mm

Max. Boring & honing depth 160mm

Rotational speed of boring &spindle 480r/min

Steps of variable speed of boring honing spindle 1 step

Feed of boring spindle 0.09mm/r

Return and rise mode of boring spindle Hand operated

Rotational speed of honing spindle 300r/min

Honing spindle feeding speed 6.5m/min

Electric motor (Power) 0.75 kw

Electric motor (Rotational) 1400r/min

Electric motor (Voltage) 220v or 380v

Electric motor (Frequency) 50HZ

Overall dimensions(L*W*H) mm 680*480*1160

Packing(L*W*H) mm 820*600*1275

Weight of main machine(approx) N.W 230kg G.W280kg